Search
Contact Cement Hot Melts PVA Glue Carpenters Glue Membrane Press Sealants Fillers & Lacquers
ViniStick 17
Sticky Super 99
Fastick Super 33

Easy flowing and highly effective carpet flooring adhesive 

CarpetStick 88 is a specialty contact cement for wall-to-wall carpeting. Its low viscosity and ´body´ allows for easy spreading over the floor and good penetration into the different kinds of carpet base. It is composed of synthetic rubber and a chain of special synthetic resins and organic solvents. This gives it extended durability.  

Product Specifications

 Solids content 21% (± 1)
 Viscosity at 23º C (Brookfield LVT, 12 rpm/2) 1700-1900 cps
 Specific gravity (kg/liter) 0.82
 Acidity (pH)  6-7
 Spread ratio (quantity/area)  180-220 gm over 1 sq.m
 Open time (working time)  15-60 minutes
 Color Light Yellow
 Shelf life  12 months
 Storage conditions  18-28º C
 Packaging  4 liter gallon

16 liter, 200 liter drum


Applications
For bonding carpeting from wall to wall on top of concrete or tiling floors. 
 
Work Instructions
Adhesive should be applied on one or both surfaces. Wait a minimum of 15 minutes before bringing both sides into contact. It is advisable to use work gloves and ventilate the workplace while applying the adhesive. Take care to prevent inhaling glue fumes. It is recommended to wear a mask while spreading the glue. 
 
Download Our Safety Data Sheet (MSDS) 
 
Note: The above information is based on Polystick´s best knowledge and is intended to provide general data only concerning its products and usage. Consequently the company is not liable as a guarantor regarding a product´s specific features or its suitability for particular applications. It is recommended that all work be preceded by tests in the work environment and with the intended materials to achieve optimal implementation.
onenet web apps